Chemicals & Materials

Market Research Reports & Consulting

Material Testing Market by Type (Universal Testing, Servohydraulic Testing), by Material (Metals, Plastics, Rubber), by End-use (Automotive, Construction, Aerospace & Defense), by Region (North America, Asia Pacific, Europe, Middle East and Africa, South America) – Global Forecast (2020 to 2027)

The Global Material Testing Market is projected to reach a value of over USD 928.8 million by 2027 at a CAGR of around 4.1%. Material testing is referred to as characteristic and behavior measurements of a substance such as ceramics, plastics, or metals under various conditions. Material testing has been carried out in the processing and manufacturing industries along with educational institutions and research & development institutes across the globe. Advanced hybrid lightweight materials are increasingly being developed for application in a wide range of industries. Reduction of repetitive work, greater consistency & repeatability, objective assessment, and ease of access to information about test& testing are some of the benefits offered by material testing.

September, 2020 | Price: $ 5600 $ 4500

Industrial Batteries Market by Type (Lead Acid, Lithium Based, Nickel-Based), by End-Use Industry (Telecom & Data Communication, Uninterruptible Power Supply (UPS)/Backup, Grid-Level Energy Storage, Industrial Equipment), by Region (North America, Asia Pacific, Europe, Middle East and Africa, South America) – Global Forecast (2020 to 2027)

The Global Industrial Batteries Market is projected to reach a value of over USD 14.13 billion by 2027 at a CAGR of around 4.8%. The industrial battery is any battery that is designed exclusively only for industrial uses. These are electrochemical devices that convert higher-level active materials into an alternate state during discharge. These batteries are used in electric vehicles to transporting, lifting, or moving materials to warehouses. Battery materials are chemical and metals widely used to manufacture primary and secondary batteries. These materials depend on properties such as crystallinity, porosity, crystal size and shape, doping, and surface modification. The battery performance is measured based on energy density, stability or cyclability, power density, price, and safety.

September, 2020 | Price: $ 5600 $ 4500

Proppant Market by Type (FRAC Sand Proppant, Resin–Coated Proppant, and Ceramic), by Application (Shale Gas, Tight Gas, Coal-Bed Methane), by Region (North America, Asia Pacific, Europe, Middle East & Africa, South America) – Global Forecast (2020 to 2027)

The Global Proppant Market is projected to reach a value of over USD 12 billion by 2027 at a CAGR of around 4.3%. Proppant is a sand material, which helps to keep hydraulic fracturing open during hydraulic fracturing treatment. It is used to close the fractures in bore well process. When the liquid mix of proppant, chemicals, and water is propelled into a well, the sudden impact opens fractures in the rock. If nothing is used to hold these fractures open, they’ll close, and the number of hydrocarbons that can escape will be far lower. There are different types of proppants used in hydraulic fractures such as frac sand, resin-coated, and ceramic.

September, 2020 | Price: $ 5600 $ 4500

Choline Chloride Market by Form (Powder and Liquid), by End-Use Industry (Animal Feed, Human Nutrition, Oil & Gas, Personal Care, and Pharmaceuticals), by Region (North America, Asia Pacific, Europe, Middle East & Africa, South America) – Global Forecast (2020 to 2027)

The Global Choline Chloride Market is projected to reach a value of over USD 690 million by 2027 at a CAGR of around 5.2%. Choline Chloride is a quaternary ammonium salt and an organic compound. It is also known as vitamin B4, is used in medications used preventing perosis by maturation and healing bone cartilages. It found naturally in fungi, hop, kingcups and internal parts of lecithin. Choline chloride is used as a nutritional component in animal feed which accelerate the growth of different pets & animal, such as chicken, rabbit, pig, horse, and many others. Choline chloride present in animal feed as free choline or its esterified forms such as phosphocholine, glycerophosphocholine, and phosphatidylcholine. Moreover, it is an essential nutrient and also used in humans as a supplement.

September, 2020 | Price: $ 5600 $ 4500

Nanoceramic Powder Market by Type Oxide Powders, Carbide Powders, Nitride Powders, Boron Powders), by End-Use Industry (Electrical and Electronics, Transportation, Medical, Chemical, Defense), by Region (North America, Asia Pacific, Europe, Middle East & Africa, South America) – Global Forecast (2020 to 2027)

The Global Nanoceramic Powder Market is projected to reach a value of over USD 16.1 billion by 2027 at a CAGR of around 15.9%. Nanoceramic powder is a type of nanoparticle which are inorganic solid made up of oxides, ceramics, carbonates, and carbides. It has strength at high temperature, similar to steel. Nanoceramic Powder is high resistance to a chemical situation that other material. The superior properties of nanoceramic powders provide scope for construction of next-generation high-speed computer chips. Apart from the electronics industry, it is widely used in the medical industry also. Nanoceramic powder is increasingly used for manufacturing artificial bone implants and other organs. Moreover, they are used in the high-performance coating of engineering metals including cast iron, steel, alloy, and other ceramic.

September, 2020 | Price: $ 5600 $ 4500

Steel Rebar Market by Type (Plain Reinforced and Deformed Reinforced), by Application (Residential, Commercial, Public Infrastructure and Others), by Region (North America, Asia Pacific, Europe, Middle East and Africa, South America) – Global Forecast (2019 to 2027)

The Global Steel Rebar Market is expected to register a CAGR of 4.2%, reaching a value of around USD 229 billion by the end of 2027. Steel rebar also popularly known as steel reinforcement bar, reinforcing bar/ steel or reinforcement steel. It is a superior and versatile composite construction material in all concrete and masonry structure, which is used as tensioning device for reinforcing the cement and holding other essential construction material at respective place in the compressed state. Rebar is formed when steel is melted through exposure to an extreme amount of heat. After this, the melted steel is allowed to pass through a small circular opening to obtaining an elongated shape of rebar. It is used in construction activities to impart additional strength. Rebar has gained huge popularity in the construction sector for the manufacturing of reinforced concrete.

September, 2020 | Price: $ 5600 $ 4500

Epoxy Resin Market by Form (Solid, Liquid), by Type (Bisphenol Epoxy Resins, Aliphatic Epoxy Resins, Novolac Epoxy Resins and Halogenated Epoxy Resins), by Application (Paints and Coatings, Food & Beverages, Transport, Construction, Consumer Application, Marine), by Region (North America, Asia Pacific, Europe, Middle East and Africa, South America) – Global Forecast (2019 to 2027)

The Global Epoxy Resin Market is expected to witness growth till USD 12.5 billion with the CAGR of 6% within the forecast period 2020-2027. Epoxy resin alternatively termed as the polyepoxide or epoxies is the thermosetting resin having higher flexural strength, tough, superior ability to adhere with excellent thermal and chemical resistance. It also has relatively good electrical properties and low moisture absorption, low shrinkage, and toxicity. The synthesis of the epoxy resin is through the reaction of epichlorohydrin with the polyphenolic compounds, diamines, amino phenols, heterocyclic imides and amides, aliphatic diols or compounds with active hydrogen group. The epoxy resin can be cured easily and are compatible with most substrates, which makes it a preferable option for the composite application. Additional uses include the building of electronic components such as fiber optics and electrical circuit boards. Epoxy resin is used in a range of industries including construction and manufacturing.

September, 2020 | Price: $ 5600 $ 4500

Peracetic Acid Market by Grade (Solution Grade, and Distilled Grade), by Application (Disinfectant, Sterilant, Sanitizer), by End-Use Industry (Healthcare, Food & Beverages, Water Treatment, Pulp & Paper), by Region (North America, Asia Pacific, Europe, Middle East & Africa, South America) – Global Forecast 2020 to 2027

The Global Peracetic Acid Market is projected to reach a value of over USD 1.2 billion by 2027 at a CAGR of around 6.8%. Peracetic acid (PAA) or peroxy acetic acid is a colorless and highly acidic liquid. Hydrogen peroxide and acetic acid are used as principal constituent in commercial manufacturing of peracetic acid. It is used in various products with concentration ranging from 5%-35% content. Peracetic acid is one of the most effective oxidizing agents after ozone. It is highly water soluble and does not produce any health and environmentally hazardous byproducts.

August, 2020 | Price: $ 5600 $ 4500

Industrial Adhesives Market by Material Base (Synthetic and Natural), by Compositions (Acrylic, Vinyl, Epoxy Resins, Polyolefin Polymers, Rubber, Amine-Based Resins), by Application (Automotive, Packaging, Medical, Electronics and Electrical), by Region (North America, Asia Pacific, Europe, Middle East & Africa, South America) – Global Forecast 2020 to 2027

The Global Industrial Adhesives Market is projected to reach a value of over USD 73.9 billion by 2027 at a CAGR of around 4.9%. Industrial Adhesives are to bind the surfaces by means of adhesive bonding processes. Adhesives can be used in various applications from packaging to building and construction. These are user-friendly and allow permanent assembly of similar and dissimilar substrates. For instance, hot-melt or spray adhesives can be used to bond fabric to wood, plastic, or metal, thus avoiding the need for stitching.

August, 2020 | Price: $ 5600 $ 4500

Metal 3D Printing Market by Technology (SLM, EBM, Metal Extrusion), by Metal Powders & Alloys (Titanium, Stainless Steel, Aluminum Alloy), By End-Use Industry (Automotive, Aerospace & Defense) by Region (Asia-Pacific, North America, Europe, Middle East & Africa, South America) – Global Forecast from 2019 To 2027

The Global Metal 3D Printing Market is projected to reach a value of over USD 2.4 billion by 2027 at a CAGR of around 25.1%. 3D printing is experiencing potential growth across different industries because more companies are increasingly using it for more than just prototyping. It allows for the direct manufacturing of complex end-use parts and facilitates tooling for conventional manufacturing technologies, reducing costs, and lead times. This technology is mainly used for fully functional prototypes, production tools, tooling such as molds and inserts, rigid housings, ductwork, spare parts, and heat exchangers and heatsinks.

August, 2020 | Price: $ 5600 $ 4500